A non-clogging ball valve straight-through flow path design for higher flow and pressures. Removes condensate, (oil and water) from compressed air systems.

Shown with Bronze Valve.
Also Available in Stainless Steel.

  • Low Cost Alternative to manual drains
    Straight-through flow pattern Prevents clogging
    Robust seat and seal design Provides extended service on the most demanding applications
    Available in several sizes Can be used on wide range of flows
    NEMA 4X enclosure Rugged and non-corrosive
    Available in different pressure ratings up to 2000 PSI Can be used on wide range of applications
    Versatile for many applications Can be used for filters, air receivers, air dryers, separators and aftercoolers
  • The BVA Series is a heavy duty condensate or process drain consisting of a gear-motor operated ball valve. A drain cycle is initiated externally by signal from a timer, PLC, or simple push button. The signal energizes the gear motor to rotate the ball valve 180° from closed to open and back to a closed position. The drain cycle lasts for approximately 5 seconds during which condensate is drained and then returned to a closed, stand-by condition.

  • Inlet/Outlet 1/4" NPT / 1/2" NPT / 3/4" / 1"
    Drain Cycle Frequency External signal
    Drain Cycle Time 5 secs.
    Pressure Bronze – up to 600 PSI
    Stainless Steel – up to 2000 PSI
    Ground Cord 8 ft.
    Power 115 V, 60 Hz., 1 Ph.
    Weight 6 lbs.
    NEMA 4X Enclosure 6" X 3" x 3"
    Stock No. Description
    BVA-2B14 / 2S14 1/4" NPT Bronze / Stainless Steel Valve
    BVA-2B12 / 2S12 1/2" NPT Bronze / Stainless Steel Valve
    BVA-2B34 / 2S34 3/4" NPT Bronze / Stainless Steel Valve
    BVA-2B10 / 2S10 1" NPT Bronze / Stainless Steel Valve
  • pdf_logo.pngDownload the BVA-Drain Brochure