A fully automatic plug and play design, zero loss drain that requires no external power utility. Translucent reservoir for visual assurance of operation.

  • Plug and Play Design Easy to Install
    Fully Pneumatic No external power utility
    Vertical compact design Can be installed in a tight space
    Non clogging No strainers to clean
    Translucent reservoir Easy-to-see condensate level. “Quick check”
    Isolated trigger assembly Ensures a positive action, preventing air loss
    Full port ball valve Provides rapid discharge and avoids pluggage by contaminants
    Versatile for many applications Can be used for aftercoolers, receivers, dryers, filters, or drip legs
  • Condensate enters the drain through one of two inlet connections. A stainless steel float is attached to a lever arm. Attached to the other side of the lever arm is a filter protected poppet assembly. As condensate is collected and the translucent reservoir fills, a stainless steel float mechanism rises. When the condensate reaches a design level, the float mechanism actuates a poppet assembly. The poppet assembly directs control air to the valve actuator, which in turn opens a full-port drain valve.

    Condensation will then exit the unit. As the float drops and the poppet seal closes the control air line and the valve actuator closes the ball valve. The drain is now ready to accept condensate again.

  • Inlet (2) 1/2" NPT
    Outlet 3/8" NPT
    Power No External Power Required
    Pressure 0 to 200 PSI
    Operating Temperature 33° to 180° F.
    Weight 8 lbs.
    Discharge 12 ounces per cycle
  •  pdf_logo.png   Download the EZ-Drain Brochure
    Download the EZ-Drain Installation Operating Manual

    Download the EZ-Drain Drawing