A fully automatic, easy to install design, zero loss drain that requires no external power utility. Translucent reservoir for visual assurance of operation.
Condensate enters the drain through one of two inlet connections. A stainless steel float is attached to a lever arm. Attached to the other side of the lever arm is a filter protected poppet assembly. As condensate is collected and the translucent reservoir fills, a stainless steel float mechanism rises. When the condensate reaches a design level, the float mechanism actuates a poppet assembly. The poppet assembly directs control air to the valve actuator, which in turn opens a full-port drain valve.
Condensation will then exit the unit. As the float drops and the poppet seal closes the control air line and the valve actuator closes the ball valve. The drain is now ready to accept condensate again.
|Inlet||(2) 1/2″ NPT|
|Power||No External Power Required|
|Pressure||0 to 200 PSI|
|Operating Temperature||33° to 180° F.|
|Discharge||12 ounces per cycle|
|Valve||Bronze w/S.S. Ball and Stem|
Complete the form to receive 3 free E-Books: The Cost of Compressed Air, The Importance of Condensate Drains, and Responsible Condensate Management
most commonly purchased condensate drain
An electric timer drain with digital, programmable screen
Can simultaneously process multiple types of oil
Handles a variety of oils, cleaner condensate discharge